Tips

Create a plant table with two zinc boxes

Create a plant table with two zinc boxes



We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Increasingly trendy, plants are taking over the decor. But far from the traditional flowerpot, today plants are presented in a more original way. So invite nature into your home by creating a plant table. Ideal in an entrance hall to welcome your guests with a floral and design note or in the kitchen for a summer touch! It's your turn ! Level: way Completion time : 2:00 Average cost : 26 euros Necessary material : - 2 rectangular boxes with zinc edges. - 4 small pre-drilled test tubes. - 1 spool of very fine wire. - 4 screws. - 2 carabiners. Step 1: Drill and assemble the two zinc boxes - Drill two holes at the lower corners of the body (5 mm from the top and 4 cm to the left and right). - Repeat for the second box, but this time at the upper corners. - Insert the two carabiners into the holes to assemble the two boxes. Step 2: Hang the test tubes - In order to suspend the test pieces, first drill two holes in the top width of the box (15 cm apart, from the center). - Wrap a wire screw. - Pass the end of the wire through one of the holes (on the outside, the screw is blocking). - Then slide the wire into the two holes in the test piece. - Reassemble it by twisting it on itself and iron it in the hole of the zinc frame. - Finally, fix the wire by tying it on the screw. - Repeat the operation for the other test pieces by playing on different lengths of wire. The most decorative: Stage your vegetable painting by illuminating it. To do this, attach a tealight using the double-sided edge of the body. Deco creation: Vérinque Rambaldi