Other

A bottle of scoubidou oil

A bottle of scoubidou oil


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

Equipment

1 bottle of beer in translucent glass 22 scoubidou threads of assorted colors 14/10 nickel silver wire 1 cutting pliers Scissors Fine cotton thread 1 needle 1 metal and cork spout

Production



7 '- Fixing

Start wrapping the bottle from the neck. Place the end of a scoubidou wire vertically on the bottle and block it as shown in sketch n ° 1. Tighten the wire well on the neck and make sure that there is no gap between each line.

3 '- Assembly

Connect the already laid wire to a new strand, forcibly sliding a 5 mm piece of nickel silver into each of the ends and making sure that the two strands are edge to edge as shown in sketch n ° 2.

40 '- Creation of stripes

Continue to surround the bottle with the wires, connecting them as you go along with the small piece of nickel silver. Cut the wires, if necessary, but align the fittings as best as possible so that they all end up on the back of the bottle. Create regular or irregular stripes by joining together several strands of the same color to increase the width of the stripe or by cutting a strand to decrease it.

10 '- Finishes

Finish the envelope of the bottle by pricking, through the end of the last strand of scoubidou, using a needle and a thread. Connect it to the top rows as shown in the sketch. Make five more “seams” on the base so that the last thread does not slip out of the bottle.

Variant

You can wrap your bottle with hemp string or raffia strands and create bottles in a more natural decorative style.

Advice

Always work by pulling hard enough on the wire so that it is stretched as much as possible on the bottle. Take care, as you go along, that the stripes remain horizontal.

20 decorations on Glass © Flammarion editions, 2003



Comments:

  1. Ihsan

    I think you will allow the mistake. I can defend my position. Write to me in PM, we will discuss.

  2. Vujas

    Yes indeed. All of the above is true. Let's discuss this issue.

  3. Nykko

    I think I make mistakes. I am able to prove it. Write to me in PM.

  4. Baruti

    In my opinion, it is a false way.

  5. Ladon

    Find it wrong?

  6. Bakasa

    I apologise, but, in my opinion, you are mistaken. Let's discuss it. Write to me in PM, we will talk.



Write a message