Comments

Easy and inexpensive: washer magnets!

Easy and inexpensive: washer magnets!


We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

5 'by magnet

Equipment

Magazines 1 box of washers (40 x 16 mm) 1 pencil Scissors 1 sheet of flexible magnet (to be cut) Contact glue

Production

2 '- Image selection

Spot small images in magazines: take a washer, drag it over the pages until you find an image that perfectly matches its central hole. With a pencil, trace the outline of the washer, then cut it by removing about 2 millimeters all around.

1 '- Cutting the magnet sheet

Cut a 2.8 x 2.8 cm square from the flexible magnet sheet.

2 '- Assembly of the different elements

With contact adhesive, glue the back of the washer as well as the part of the image that will not be visible. Wait for the glue to dry, then put these two elements in contact. Then glue the back of the image and the magnet. After drying, assemble.

You can create magnets of all sizes because the choice of washers is very large. However, choose those with a large central hole so that you can drag an image into them. For small washers, you can use solid colors in the center.

Advice

If the weight of the washer is too great, consider increasing the surface of the magnet. In order not to go wrong with the side of the magnet to be glued, do a very simple test: put it on the washer. Then glue the face of the magnet which is not attracted by the washer against the latter. 20 Metal and wire objects © éditions Flammarion, 2004



Comments:

  1. Cerin

    You are mistaken. I can prove it. Write to me in PM, we will communicate.

  2. Tygokasa

    Not quite understood that you wanted to say about it.

  3. Adalwolf

    Bravo, excellent idea

  4. Kegul

    Normul, I have been looking for it for a long time! thanks to all...



Write a message