Comments

How to quickly seal a shutter hinge?

How to quickly seal a shutter hinge?



We are searching data for your request:

Forums and discussions:
Manuals and reference books:
Data from registers:
Wait the end of the search in all databases.
Upon completion, a link will appear to access the found materials.

The hinge of your shutter is damaged and you are not sure what to do? It is possible to repair the hinge yourself. Here are tips on how to go about using Toupret products. First get the necessary equipment: - A box of Chrono Toupret sealing plaster. - A wire brush and a dusting brush. - An augette. - An 8 cm filling spatula or a small trowel. - A construction sponge. - A wooden block if necessary. First prepare the surface by removing the damaged hinge. Clear the hole with the wire brush to remove cement residue. Brush to dust the surface. Prepare the coating by mixing the powder and water in the tray. Fill the hole with the dough when it is very thick. When the hole is well plugged and the surface smoothed well in line with the lines of the wall, push the hinge into the plugged cavity. Hold it in its final position for 3 to 4 minutes. If necessary, use the forestay to hold the hinge in place. As soon as the coating begins to harden, use a utility knife to cut the surface. Use a damp sponge to smooth the surface. 3 hours later, you can put the shutter back on. The coating supports up to 30 kg. If they are heavier, wait 24 hours.